General 2.8d turbo engine parts wanted

[AndiePenny]

I am looking for a2 brackets off a 2.8d turbo I believe its the iDTD engine, the donor vehicle was a 2000 X reg diesel turbo manual pump type

I need 2 brackets off the actual engine block, their purpose is to bolt the lower 2 holes on either side of the gearbox to the engine

The first is situated behind the starter motor on the front of the engine, the second is below the turbo on the rear of the engine

If anyone can tell me a part number for these brackets I would be much appreciated as I will just go to fiat and purchase them but cant for the life of me find any part number or information to help source these brackets

if anyone has a broken engine with these brackets on then I will purchase the whole engine if needed or even just the brackets, I have uploaded a picture of the engine so you can see where the bracket resides, if anyone can help me I would be very very appreciated

the pic attached is a general idea of where the brackets are and not the actual engine, but it is a good representation of what they look like

thanx to all

Andie

 

[dunnie]

are these brackets to secure gearbox to engine.(bell housing)

 

[moodrater]

http://eper.fiatforum.com/eper/navi...INT_MODE=0&EPER_CAT=SP&GUI_LANG=3&WINDOW_ID=1

 

[moodrater]

The 2.5 should be the same by the way