hello,
i have 2006 fiat punto MK2b, 1.2 16V CVT gear.
i think that 2 bulb in the center console are dead.
but i can't disassemble the console.

i followed 2 guides here but still no go. i think that because i have CVT, the console disassemble differently.

i unscrewed 4 allen bolts and still nothing...
the hole center console is one peace. it goes all the way back to the handbrake.
i unscrewed 2 philips bolts and still no go...

help is needed.. (picture will be most helpful!)

cany't do pictures as bluetooth connection at home but

two allen fasteners under ash tray
fastener each side of kick panels in foorwells need removing
i assume fasteners where gear lever is (im not pulling mine apart to look but theres usually 2 x 10mm headed nuts around here
pull out flat panel in front of handbrake where electric mirror switch is
2x 10mm headed bolts here
pull rear ashtrat out ,remove small hex bolt then 10mm headed bolt under neath here
it is a bit tight with seats in to remove these consoles so takes your time

you should now be able to get to bulbs?

i did all that today.
but
pull out flat panel in front of handbrake where electric mirror switch is
2x 10mm headed bolts here
not found.

i assume fasteners where gear lever is

there are 2 of them...

still no go.

anyone succeed doing this?

i've managed to do this, think i need to do it again as 2 of the LED Bulbs keep working loose

nikkiy9 said:

i've managed to do this, think i need to do it again as 2 of the LED Bulbs keep working loose

Click to expand...

how?
well, i disassembled the parts but no go...
if you disassemble it, please take picture of the process.

thanks

anything new? have you done it?