Looking to change my front discs and pads on my evo multair 105bhp. Looking at just something standard and found some bosch and eicher on carparts for less/eurocarspares.
Anybody used these and have an opinion on them or does anyone recommend any other brand.
Cheers

Stef

Hi,
do a search ("advanced" works well..!!)

seen several threads covering this recently, GP section would be favourite..,

Charlie

www.mtecbrakes.com for discs and pads.


http://www.remmenexperts.nl/en/ for pads.


I use Mtec only grooved, Black Edition discs, and Ferodo DS Performance pads on both my daily drivers, and it is just perfect.
It's a straight swap with the original parts, but braking has improved a lot.

Does anyone know what size my front discs are as they list 2 sizes 257mm and 284mm

i'll just pop over & measure them for you.

aren't u funny maggers

normally down to the brand used..,
best to take wheel off and get as much info as possible..

AWKWARD to measure insitu

Charlie

varesecrazy said:

normally down to the brand used..,
best to take wheel off and get as much info as possible..

AWKWARD to measure insitu

Charlie

Click to expand...

Was trying to avoid taking wheel off because as you say Charlie unable to get a proper reading in sit.
I have just purchased some eicher discs and pagid pads off eurocarparts they assure me it's 257mm. Will fit tomorrow.

Cheers

Stef

llanrads said:

aren't u funny maggers

Click to expand...

It was a genuine offer but then the Welsh aren't known for their sense of humour.

Think you find that we have just leave our sheep alone.

Granted you have some pretty sexy sheep especially in stockings.

That will be Baaabara

Back to the discs and pads they were 257mm after all fitted them today eicher discs and pagid pads they seem fine . Having said that not driven it hard yet . My car has done 48k on a 10 plate and although from the wheel the discs looked nice and clean and even wear with a lip on em, the inside was a different story full of grooves on the disc with only 50% of the pad actually making contact with the surface of the disc, the rest was just rust.
Beware all check them

Stef