hello does anybody know if alloy wheels from a fiat Multipla will fit a panda cross please 2001 6j15"PCD - 4x98, Offset ET31.5, 6.5J wide.mine is 15" 2010 what is the pcd offset for my car.

thank you

bowie1

This photo was from the wheel of my 2009 Panda Cross.

Jabe said:

This photo was from the wheel of my 2009 Panda Cross.

Click to expand...

thanks so is this different will it fit

bowie1 said:

thanks so is this different will it fit

Click to expand...

The offset is 24mm and the Multipla 31.5mm.

On my Panda 100hp the Punto wheels I have are 35mm offset and have no effect on the brake calipers etc.

However - for you to use the Multipla wheels on your Panda Cross you might be best adding some 7mm spacers to get the offset compensated(and will need longer bolts).

Try a web search for “wheel offset calculator” and you willfind several sites that give an instantanswer. I have used this one in thepast:

http://kgm.tiwing.com/calcs/offsetcalc.htm

Thanks for all the advise chaps,will have a look at the chart and see if I can work it out,all I want to know is what outher fiat 15" alloy will fit straight on without spacers or bolts,i want to put some proper snow tyres on for the winter and keep my cross wheels clean.could get a set of 4 form a breakers yard if I new what outher fiat car will go straight on.

bowie1

what outher fiat 15" wheel will fit straight on without the use of adaptors.will these go on 6J X 15 H2-43 on ebay item number is this 300948003999 that is what is on the back of these wheels the same as mine but for the 43.

cheers

old thread, after a new cross does any body know the size and offset of the new one 2015 model please,will the normal 4x4 panda ones fit.