General Gearbox Oil & Cv problems

Currently reading:
General Gearbox Oil & Cv problems

HELLBOY787

New member
Joined
Dec 10, 2006
Messages
5
Points
3
Helloa!

I have a 1991 4x4 38,000 on the clock and I have just had to replace the on eof the inner CV bootys and I now have to top up the gearbox oil, and please don't take the micky, but Im not sure where the Hole is to put the oil in, the potters manual is unclear too

please could anybody give me description of what i should be looking for
 
HELLBOY787 said:
Helloa!

I have a 1991 4x4 38,000 on the clock and I have just had to replace the on eof the inner CV bootys and I now have to top up the gearbox oil, and please don't take the micky, but Im not sure where the Hole is to put the oil in, the potters manual is unclear too

please could anybody give me description of what i should be looking for
well it isn't the one on the left that the engine oil goes in... i think somewhere under the servo there should be another dipstick. you fill it down that hole i believe...
 
Tony ?

It's shown on the pic. Needs a 12mm Allen key.
 

Attachments

  • box1a.JPG
    box1a.JPG
    39.7 KB · Views: 62
Alan.D said:
Tony ?

It's shown on the pic. Needs a 12mm Allen key.
i thought he was filling it up...

ok, so i was guessing... i was on the right side of the engine bay though...
if he had a selecta then i'd be on the money :)
 
Last edited:
aribold said:
selecta 4x4 would be fun :rolleyes:
oh my god, that gearbox and the added complications of the 4x4 diff... you'd shoot yourself rather than do maintenance...
 
Ok Dudes! Now Im even more confused!

Thanks for the info, but any other advice?

I think that im going to have to phone my local & very unhelpfull Fiat dealer and see if they can shed some light on this matter!
 
Alan.D said:
Undo the plug that's got the red square round it and put oil in till it starts to flow out.
i am guessing the drain hole is in a different location...
 
Back
Top