Guides by atomicwolf

How to re-seat the fuel gauge needle after it jumps off the spindle. Tools required Ignition off needle dropped Ignition on almost full tank of fuel. Disconnect battery- only if you want to(not necessary) Locate and remove HEX screws - 2 on left, upper and lower 2 on right...

How to replace a rear exhaust rubber mounting If you need to you can refer to the photos below. 1) As you can see the original rubber mounting on the rear of the exhaust is worn through and this is why the exhaust is 'banging' at the back. 2) Another angle so that you can see where the...