Hi I need a good source for wiring diagrams.
I am working on a 2008 Grand Punto duralogic, I am using Autodata for my wiring diagrams at the moment but it is not very good, the fuses for certain things are not even listed on the fuse boards.

Paul

The Fiat eLearn workshop manual, including wiring diagrams, can be downloaded from the forum downloads section here: https://www.fiatforum.com/downloads.php?do=download&downloadid=429
.

Hi Davren, I have a Grand punto E learn CD but i found it very hard to find wiring diagrams that I need, and I could not find one for the duralogic ecu. Maybe the link you have sent me is different, I will down load and see .


Many Thanks

Paul

Hi I have downloaded the e learn cd but i still cant find the wiring diagrams, I must be stupid. can you direct me please.


Paul

Hi Paul, I'm afraid there is no specific drawing for Dualogic robot in eLearn ...

Regards, Bernie.

Hi Bernie, i was looking for a wiring diagram for the starting, On my Autodata it does not make sense with my fuse box, The starter relay is ativated by another relay called ignition main circuits relay , And i cant find this Relay, I contacted Autodata and they said it built on to smart fuse board, But I don't believe it is.


Paul

Hi Paul, from what I can read on the Brasilian Stylo's Dualogic book, the starter relay is activated VIA the dualogic controler, which makes sense since the engine needs certain gearbox condition in order to be cranked ...
Can't get more detailled (internal) drawing. I guess Grande uses a similar approach regarding the startin validation.

BRs, Bernie

If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)

Hi Bernie, So seeing that I only have one code P0720-62 I need to investigate. I have already changed the sensor and it makes no difference, I will put my Pico scope on the sensor wires later today to see if I am getting any sort of signal. on the fault code, do you know what the second bit of the code refers to? P0000-62?.

Thanks

Paul

Sorry Paul, no idea about the second part of the code :-( What reader/SW do you use ? What's the comment (if any) ?

BRs, Bernie