- Joined
- Jan 13, 2018
- Messages
- 160
- Points
- 54
Ok I'm tearing my hair out here.
Purchased a refurbed steering unit which I was told didn't need a code.
Mechanically it's fine, works perfectly, city mode included.
BUT... It's throwing a U001 Can signal error.
I purchased a multimeter and checked out the earths at the weekend as per the elearn diagnostic.
Measured battery voltage, then voltage across the connector to the unit.
Static load I had a 0.2V drop. Dynamic load there was no drop in voltage.
So I'm assuming the earth's are all ok.
Where the hell do I go from here though? Got my MOT in a month and it's going to fail even though there's nothing wrong with it.:bang::bang::bang:
Purchased a refurbed steering unit which I was told didn't need a code.
Mechanically it's fine, works perfectly, city mode included.
BUT... It's throwing a U001 Can signal error.
I purchased a multimeter and checked out the earths at the weekend as per the elearn diagnostic.
Measured battery voltage, then voltage across the connector to the unit.
Static load I had a 0.2V drop. Dynamic load there was no drop in voltage.
So I'm assuming the earth's are all ok.
Where the hell do I go from here though? Got my MOT in a month and it's going to fail even though there's nothing wrong with it.:bang::bang::bang: