Hi guys,

I ordered a HID kit and installed them. After a few days, one side stopped worked. Now i dont know if i installed it wrong or it was just a faulty kit. Anyway, i got it replaced and i now want to do it error free just in case it was me who installed the kit wrong.

The way i connected the kit before was as follows:
• Put the bulbs in
• Connected to ballasts
• Connected to h/l controller
• h/l connected connected to original halogen lamp connector with some side free (is this correct?)
• Then i connected positive and negative to battery

The guide that comes with the kit says i should connect the positive to the fuse box.



As last time i connected both to the battery, could this have been the reason that one side stopped working? Should I connect to fuse?



And this is the overall diagram.

If anyone can help me with this i would be grateful

have you gone over your connections? and do you have any warning lights on the dash?

My hid's don't connect to my battery :s
One side broke for me too turns out it was the ballast and bulb I guess some of them are just duff from the start

Reuuk said:

have you gone over your connections? and do you have any warning lights on the dash?

Click to expand...

I have my sidelight warning lights on the dash as i put LEDS

kyle96 said:

My hid's don't connect to my battery :s
One side broke for me too turns out it was the ballast and bulb I guess some of them are just duff from the start

Click to expand...

I guess they're all different? Im not sure what my problem was. Im thinking wiring since i swapped lights and ballasts and turns out one side is the only side that works

Good HID's should draw there power without having to be connected to the battery.

got another car you can try them on?