Hi Guy's

I have looked on the epr under front brakeing system and also the fixings section but can not find.

I need to know the part code and what the 2 small star bolts are called that screw your brake disk to the front hub they are only tiny.

Any help would be so apreciated thanks in advance.

You mean the torx 30 screws, your wheel bolts will hold disc to hub.
Where are the old ones(chewed?)

Hi

the two 30 tox screws thats then they are in the in between the holes for the wheel bolts and yeah they have been rounded so need to get them off snd replace them.#

cheer T here to save the day as always

I replaced mine with alan headed ones think they are 5mm, any good hard wear store should sell them.

I won't worry too much about getting Fiat screws, they are only there to stop the brake disc falling onto your toe when you take the wheel off.

Have just spoken with Fiat they want £1.50 + vat per screw my thoughts were screw you.....

Does any body have any ideas of the size of them so i can go and get some from my local hardware store. Hopfully they won't try robbing me blind like fiat....

Thanks

i put old ones back on, few taps with sharp chisel, as mentioned they not important.