Technical Washer jets modification (lots of pics)

Currently reading:
Technical Washer jets modification (lots of pics)

No, I still don't have it... but I was informed from ePer that it was a modification recently.

you can see the old and new numbers and differencies in this post:

http://forum.index.hu/Article/viewArticle?a=130058633&t=9128494

These available at Fiat dealers or thru ebay.it for example

(I read many people complain about washer so it was high time to replace the jets...)

We will try it soon....
 
Last edited:
Hm. I thought it would be clear for the first sight :)

So these are the current, latest, and modified ones:

51927099 (RH) 51927098 (LH) -> replacing (18.11.2013), actual

Right and left are different... maybe the angle of the "beam"
 
try it at one of your Fiat dealder. In my country it is available for order and necessary to pay 50% deposit for the order.
 
Hm. I thought it would be clear for the first sight :)

So these are the current, latest, and modified ones:

51927099 (RH) 51927098 (LH) -> replacing (18.11.2013), actual

Right and left are different... maybe the angle of the "beam"


Dont worry it was the use of replaced, Obsoleted followed by the new part numbers that confused me.

usually that phrase would be used followed by the old numbers such as

Part "New" replaced obsoleted part "old"

But i know English isnt your first language :)


I telephoned www.shop4parts.co.uk which is located about 25 miles from home to clarify the parts are correct, they are ordering me them from fiat then shipping them to me, (and they speak Yorkshire English) ;) :wave: :D




If the washers are like the old ones the drivers side and passenger side only difference will be the length of the rubber tubing. In the UK specification the drivers side pipe was about 1m long and the passenger side was about 300mm long I would guess that the left hand drive order number will be a swap of hose lengths as the screen wash bottle supply pipe comes up in front of the left hand side of the car if you are sat in the seat to the Y shape pipe junction
 
Last edited:
No, I still don't have it... but I was informed from ePer that it was a modification recently.

you can see the old and new numbers and differencies in this post:

http://forum.index.hu/Article/viewArticle?a=130058633&t=9128494

These available at Fiat dealers or thru ebay.it for example

(I read many people complain about washer so it was high time to replace the jets...)

We will try it soon....

Hi and thank for your PM ! Nice new, hope these new jet works better ???
I'ts hard for me to understand a so small problem for a 2005 car is corrected... at the end of 2013 !

But if this works I order a crate of these :cool:

I wait your tests Andy ;)
 
Last edited:
When will you receive them?
Are you going to do some pics about the jets' working and share your expereinces? :)
So I suppose you discussed that left hand side and right hand side use the same jets.
And are you confident that these come with the rubber tubes?
 
crate of these... to whom? :) You need only 2 :)
And yes, it took too long for Fiat... :(
 
Not ordered yet, I wait Andy Monty test them.

A crate ? Because this bother me since I bought my car, because other things are fine and this little shi** of washer jets don't work at all... And I have two Punto and I know two other that will be more than happy with new jets. ;)

I did some search and this part does not replace the older. If I enter my VIN, the parts are the old :
punto_2005-2012_washjet.png


If I search with your new parts number, these are only for Punto MY2013 :
punto_2013_new_washjet.png


As I can see tubing is not included, separate item. Jets should have different beam angle.
 
Last edited:
Okay :)
which ePer do you use?

If you check it on the drawings you see only the old numbers.
But if you use the latest ePer you can extract the infomation below and you can see the new PN numbers. And my Fiat dealer also told me the old ones are obsoleted.
 
Last edited:
Nobody tested yet :)
I've just informed about the new jets...
According the picture, I think it would be better because of the 2 thin holes on every jets... would be more efficient.
 
Nobody tested yet :)
I've just informed about the new jets...
According the picture, I think it would be better because of the 2 thin holes on every jets... would be more efficient.

It's really nice to inform us, thanks again :)

Andy, we are with you :slayer:

well first impressions are very good :D Just been out to fill with fuel 60 MPH and water actually hits the screen :eek: :D :D :eek: :slayer: :slayer:

https://www.fiatforum.com/grande-punto-guides/348575-washer-jet-upgrade.html?p=3464212


my jets came with hose but i just used what was there already
 
Back
Top