LittleGreyCat
Member
- Joined
- Oct 6, 2008
- Messages
- 38
- Points
- 63
Hi,
I am having trouble locating an adapter and software to enable me to read diagnostics from a 2001 2.8 JTD.
The diagnostic port is a three pin connector with two wires under the bonnet on the near side of the vehicle.
I can see ODB and ELM327 leads on eBay which allegedly can let freeware diagnostic software read engine codes, but I would appreciate some instructions on which lead to get, which software to get, and how to interface between the three pin plug and the lead.
I will probably need to make up a long extension lead as well as I would like to bring the diagnostic socket back inside the cab area.
Any information greatly appreciated.
Cheers
LGC
I am having trouble locating an adapter and software to enable me to read diagnostics from a 2001 2.8 JTD.
The diagnostic port is a three pin connector with two wires under the bonnet on the near side of the vehicle.
I can see ODB and ELM327 leads on eBay which allegedly can let freeware diagnostic software read engine codes, but I would appreciate some instructions on which lead to get, which software to get, and how to interface between the three pin plug and the lead.
I will probably need to make up a long extension lead as well as I would like to bring the diagnostic socket back inside the cab area.
Any information greatly appreciated.
Cheers
LGC