At the moment when I turn the ignition on, the display does not tell me when the next service is due.
Fiat say that you can turn this on by pressing the reset button and clock button in a certain order.

Does anyone know how to do this ?

Thanks.

[email protected] said:

At the moment when I turn the ignition on, the display does not tell me when the next service is due.
Fiat say that you can turn this on by pressing the reset button and clock button in a certain order.

Does anyone know how to do this ?

Thanks.

Click to expand...

To set the Configuration for service intervals:
Quote from the Manual
To change the service frequency with the vehicle statonary turn the ignition key to MAR & press button E ( RHSbutton) for about 10 seconds: the display will show the wrench symbol & the message CGF 1 or CFG 2 or CFG 3
Press briefly the E (as above) button to set the required configuration, as in CFG 1 or 2 etc, then press it again for about 5 secs to store the new service frquency: the display will show again the clock & Km
CFG 1= 30,000 Km or 365 days
CFG 2= 20,000 Km or 365 days
CFG 3 =15000 Km or 365 days
All this is in the manual on page 32 & 33
as far as I know mine has never came up with the number of Km to go to the next service just the flashing wrench symbol for 5 secs on ignition on then when it is near the due mileage or time the wrench flashes or stays on.