Technical X290 Ducato replacing classic lights DRL

[Dodes23]

Hello,I need help on how to proceed when changing the front lights,I changed from classic to lights with LED daytime running lights,but they start flashing after starting
I can connect to the ECU with MES,I read that something needs to be changed in the proxy,but I don't know how to proceed
Thank you
Ducato x290
3.0 130kw
2017

 

[theoneandonly]

Ive not done this myself but think the best approach would be to backup the proxi file which should still work with the original configeration if you were to refit. Then run the new proxi alignment.

Backup Proxi file on MES

This is repeat of an old post on how to create a backup of the MES proxi file

www.fiatforum.com

New proxi alignment with Multiecuscan

To create a new proxi file (once you have changed things that need a proxi alignment). For example changing an airbag module. Prior to any proxi alignment it is advisable to create a backup first. See guide...

www.fiatforum.com

 

[Dodes23]

Sám som to neurobil, ale myslím si, že najlepším prístupom by bolo zálohovanie súboru proxi, ktorý by mal stále fungovať s pôvodnou konfiguráciou, ak by ste ho znova namontovali. Potom spustite nové proxi zarovnanie.

Backup Proxi file on MES

This is repeat of an old post on how to create a backup of the MES proxi file

www.fiatforum.com

New proxi alignment with Multiecuscan

To create a new proxi file (once you have changed things that need a proxi alignment). For example changing an airbag module. Prior to any proxi alignment it is advisable to create a backup first. See guide...

www.fiatforum.com

dakujem tento postup som skusal 2x a bez uspechu, jedine co som cital je ze treba zmenit 2 byte v proxy ale neviem ako

 

[theoneandonly]

dakujem tento postup som skusal 2x a bez uspechu, jedine co som cital je ze treba zmenit 2 byte v proxy ale neviem ako

thank you, I tried this procedure twice and without success, the only thing I read is that you need to change 2 bytes in the proxy, but I don't know how

If you use the same procedure as backing up the proxi file ie use a text editor like notepad or notepad++ then change as per your instructions.

 

[Dodes23]

thank you, I tried this procedure twice and without success, the only thing I read is that you need to change 2 bytes in the proxy, but I don't know how

If you use the same procedure as backing up the proxi file ie use a text editor like notepad or notepad++ then change as per your instructions.

So,I have successfully connected the lights, in the proxy you need to change the bytes at position 76 to A8 and the bytes at position 134 to A0,if anyone has a similar problem after changing the lights to lights with LED daytime running lights
Thank you

 

[Stevy]

So,I have successfully connected the lights, in the proxy you need to change the bytes at position 76 to A8 and the bytes at position 134 to A0,if anyone has a similar problem after changing the lights to lights with LED daytime running lights
Thank you

Hello Dodes, nice to know you've managed to change the standard DRL to headlights with DRL in LED. I want to do the same thing and have bought new Ducato headlight with DRL in LEDto change with my excisting headlights with the DRL in halogen. I've the multicuscan software, what do you mean with c to change bytes at pos. 76 to A8 and 134 to A0 ? Where can I find these bytes ?

 

[Dodes23]

Hi,you have to get into the proxy settings and at positions 76 and 134 you have to overwrite the values
That's all

 

[Dodes23]

Hello Dodes, nice to know you've managed to change the standard DRL to headlights with DRL in LED. I want to do the same thing and have bought new Ducato headlight with DRL in LEDto change with my excisting headlights with the DRL in halogen. I've the multicuscan software, what do you mean with c to change bytes at pos. 76 to A8 and 134 to A0 ? Where can I find these bytes ?

 

[gato]

Hi,you have to get into the proxy settings and at positions 76 and 134 you have to overwrite the values
That's all

@Dodes23 any solution for full led headlights? I have bulb error on the dash, coding bytes 76 and 134 doesnt work in my case.

 

[the green vanper]

Use the search function, there was at least one thread when someone put the x290 lights to the x250 and also someone from France that retrofitted full LED lights to his x290.

There were very useful information in both threads.

 

[gato]

Use the search function, there was at least one thread when someone put the x290 lights to the x250 and also someone from France that retrofitted full LED lights to his x290.

There were very useful information in both threads.

I've been digging through the internet for a few days now, and aside from people mentioning adding resistors, I haven’t found any solid or detailed answers

 

[the green vanper]

I've been digging through the internet for a few days now, and aside from people mentioning adding resistors, I haven’t found any solid or detailed answers

2022 Ducato Full LED headlights | FIAT Ducato

I've ordered a 2022 LHD Ducato based campervan from. France. It's nicely specced including full LED headlights with LED DRLs. Does anyone know if its possible to adjust these headlights for driving in the UK (so it passes the IVA??) I've seen elsewhere that these LEDs have quite a flat beam...

www.fiatforum.com

2024 Ducato Full LED headlights | FIAT Ducato/e-Ducato (Gen 3)

I am in the process of purchasing a new 2024 LHD Ducato-based campervan from France. It's nicely specced, including full LED headlights with LED DRLs. Does anyone know if its possible to adjust these headlights for driving in the UK (so it passes the IVA??) I've seen elsewhere that these LEDs...

www.fiatforum.com

+ the one regarding the x250:

Change front end on 09 ducato x250 to 2015 | FIAT Ducato

Has anyone got any advice or help on changing the front end on my Fiat Ducato maxi 2009 to a facelift 2015 I was told to buy the bonnet full bumper & grill Both wings Slam panel Headlights & brackets Radiator Scuttle tray and pipes But is this a case of taking old of and fitting new...

www.fiatforum.com

 

[gato]

2022 Ducato Full LED headlights | FIAT Ducato

I've ordered a 2022 LHD Ducato based campervan from. France. It's nicely specced including full LED headlights with LED DRLs. Does anyone know if its possible to adjust these headlights for driving in the UK (so it passes the IVA??) I've seen elsewhere that these LEDs have quite a flat beam...

www.fiatforum.com

2024 Ducato Full LED headlights | FIAT Ducato/e-Ducato (Gen 3)

I am in the process of purchasing a new 2024 LHD Ducato-based campervan from France. It's nicely specced, including full LED headlights with LED DRLs. Does anyone know if its possible to adjust these headlights for driving in the UK (so it passes the IVA??) I've seen elsewhere that these LEDs...

www.fiatforum.com

+ the one regarding the x250:

Change front end on 09 ducato x250 to 2015 | FIAT Ducato

Has anyone got any advice or help on changing the front end on my Fiat Ducato maxi 2009 to a facelift 2015 I was told to buy the bonnet full bumper & grill Both wings Slam panel Headlights & brackets Radiator Scuttle tray and pipes But is this a case of taking old of and fitting new...

www.fiatforum.com

@the green vanper, you're posting random links that add nothing to the discussion.

Anyway, the issue is now resolved. For future reference: in AlfaOBD, I've disabled sidemarker diagnostics — now no errors, everything works as it should.