20VMarea.Weekend
New member
Further to my post last week we are still none the wiser as to why the brakes failled just the once....!!!?? Pedal was solid, did not drop to the floor but absolutely no braking effort returned...
The local garage have now tested it all on the rolling road and all the braking forces are even.... Servo seems to be working fine ie pedal drops about an inch when held down and the engine started....
As a precaution they took both front and rear pads out and cleaned everything and then reassembled and the brakes feel fine... Pulls up sharp and despite any amount of eractic pumping or hard braking I cannot fault the brakes...
Anyone got any more suggestions or had a similar experience with their Marea...
The local garage have now tested it all on the rolling road and all the braking forces are even.... Servo seems to be working fine ie pedal drops about an inch when held down and the engine started....
As a precaution they took both front and rear pads out and cleaned everything and then reassembled and the brakes feel fine... Pulls up sharp and despite any amount of eractic pumping or hard braking I cannot fault the brakes...
Anyone got any more suggestions or had a similar experience with their Marea...