General will these fit?

[Raph406]

they are BBS wheels i've seen alot on mk3 jettas. .14 x 6 and 4 x 108mm
14inch wheels. i really like the look of them them
http://www.jason-parker.net/images/wheels/93 SE BBS wheel 2.jpg

 

[ladaspeed]

They certainly will not bolt on, as the stud pattern is 4 x 98 on an X, and without knowing the offset of the wheel it is a bit of a reach to say they would fit without spacers or guard work.

Being off a Jetta I would say they are a front wheel drive offset therfor not really suitable without hub adapters.

 

[jimbro1000]

Without some serious surgery they won't fit - 10mm extra on the PCD is a lot to overcome. It isn't just the PCD - the wheels need a hub centric fit so the centre spigot needs to be the right size. The offset is probably the easiest bit to get around...

 

[Neojames2k]

Hi Raph,

If you can find a set of these wheels which have come from a jetta the pcd should be 4x100mm not 4x108mm you'll probably find you'll also need a spacer to counteract the fact that the offset of the wheels will be higher than stock

In which case you could probably get away with using these

http://cgi.ebay.com/ebaymotors/WHEE...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

which would also solve the center bore problem as the spacer fits over the center bore of the hub completely

hope this helps

Cheers