What do these mean and how to solve them?

[Brad G]

Alright guys got a Dianostic of my car and came back with these results. My passenger airbag light is on also on the dash

Fault Code Description
0206 - Control unit power supply, value too low
1A12 - Airbag failure warning lamp, no power supply
0901 - Passenger airbag squib, open circuit
0907 - Passenger airbag squib, vale too high


Im also needing a Rear Engine mounting. Have checked ebay and euro car parts both dont stock

:bang:

 

[andy171baz]

Alright guys got a Dianostic of my car and came back with these results. My passenger airbag light is on also on the dash

Fault Code Description
0206 - Control unit power supply, value too low
1A12 - Airbag failure warning lamp, no power supply
0901 - Passenger airbag squib, open circuit
0907 - Passenger airbag squib, vale too high


Im also needing a Rear Engine mounting. Have checked ebay and euro car parts both dont stock

:bang:

Hi, did you sort this, if this was a toyota, i would be checking fuses 1st, the squib with my manufacturer is the passenger airbag itself, so is turned off for starters? has any glove box/radio work been done recently which might be pulling on the airbag loom?, does the airbag light, light up?, you can normal find the airbag ecu down on the floor centre console, so has any of these area's been worked on?, power supply low, may be battery voltage not right?.
I would start with clearing all codes and recheck as soon as the light pops back on, may be you could arrange with the code reader a 2nd half price or even free read to clarify the problem area, see if same code come back on etc etc.

Dont forget, these are just views and im a toyota tech not a fiat tech, Cheers andy