General Tipo foglights on uno

Currently reading:
General Tipo foglights on uno

cholmes0305

Member
Joined
Jun 11, 2003
Messages
142
Points
51
Location
County Durham
Hi

After checking a local car parts supplier they told me it would cost me around £120 for a set of front foglights for my mk2 uno. Not wanting to spend that much I found some on an M reg tipo. they look like they should fit.

does anyone know if i'll have any problems fitting them before i start cutting the holes from the bumper?

also, is the wiring already there for them in all uno's? There's a plug connector on the foglights and i wondered if this would be anywhere in my car already.

I have added the extra button on the instrument panel where the blank was.

Thanks

C Holmes

Cholmes0305
 
i tried doing this on my uno when i had it, the lights fit in the hole perfectly but i couldnt find the wires to connect them up with so i just bodged together a switch for it, but never really got to test them cause i wrote the car off a few weeks later

sig.jpg

Seicento Sporting, Modified Front Bumper, Saxo Custom Spoiler, Abarth Side Skirts, Bad Boy Bonnet, Afterburner Rear Lenses, 4" Powerflow Exhaust System, Abarth 14" Alloys.
IN THE PIPELINE:
-40mm Drop or Coilovers
New Front Bumper
Rear Splitter
New Mirrors (Not the cup ones[xx(], something different)
ICE Install to be completed

Check out my site: http://badboygaz.mysite.freeserve.com​
FIATForum stickers available PM me for details or see: https://www.fiatforum.com/forum/topic.asp?TOPIC_ID=10000
 
I've found a plug behind the plastic above the driver's footwell which is very similar to what's on the lights only it's not as wide. so i'm not sure if that's meant to be it but different on the tipo.

Cholmes0305
 
cant u rip the tipo wiring out and see if its easier to bodge it together that way

sig.jpg

Seicento Sporting, Modified Front Bumper, Saxo Custom Spoiler, Abarth Side Skirts, Bad Boy Bonnet, Afterburner Rear Lenses, 4" Powerflow Exhaust System, Abarth 14" Alloys.
IN THE PIPELINE:
-40mm Drop or Coilovers
New Front Bumper
Rear Splitter
New Mirrors (Not the cup ones[xx(], something different)
ICE Install to be completed

Check out my site: http://badboygaz.mysite.freeserve.com​
FIATForum stickers available PM me for details or see: https://www.fiatforum.com/forum/topic.asp?TOPIC_ID=10000
 
foglightplug.JPG


OK this is the plug i've found in the driver's side. it only has two wires going to it. could this be the one for the front fogs and linked to the switch?

Cholmes0305
 
ok, sorry to bring this up again but does anyone at all know where all the wiring is for the foglights, if it's there at all. They weren't fitted as standard on my uno.[?]

Cholmes0305
 
Back
Top