fellesweden
New member
- Joined
- Oct 18, 2008
- Messages
- 2
- Points
- 2
Hi Fiatforum
I recently bought a Fiat tipo 2,0 8v gt Abarth and I have some major problems with the digital dashboard.
My Problem:
The dashbaord only works when I have all of the lights switched off on the knob. When I turn the switch to parking-light or regular lights the dash goes black.
However if I remove the fuse ,10A second one from the top, that is linked with the dash the whole digital dash comes to life again. The problem is that if I do this the front right parkinglight and the rear left parkinglight and the right.light that lights the plate number goes out.
I have checked the earthcables under the battery tray (two black ones and one smaller black one).
I have also checked the digital-boards back to see if any soldering was loose but seems ok.
Any suggestions before I give up?
Cheers
Felix
Sweden
I recently bought a Fiat tipo 2,0 8v gt Abarth and I have some major problems with the digital dashboard.
My Problem:
The dashbaord only works when I have all of the lights switched off on the knob. When I turn the switch to parking-light or regular lights the dash goes black.
However if I remove the fuse ,10A second one from the top, that is linked with the dash the whole digital dash comes to life again. The problem is that if I do this the front right parkinglight and the rear left parkinglight and the right.light that lights the plate number goes out.
I have checked the earthcables under the battery tray (two black ones and one smaller black one).
I have also checked the digital-boards back to see if any soldering was loose but seems ok.
Any suggestions before I give up?
Cheers
Felix
Sweden