Grande Punto Technical service manual needed

[DaveG1975]

Hello I have just recently bought a 2013 fiat punto grande 1.4 petrol ( I think its 89bhp) and I'm wondering if anyone has a technical service manual in English please.
I have a Haynes but it doesn't have what I need.
I require the wiring schematic that has voltage and pinout cable colour for the o2 sensor/s or lambda sensors, I know very little about cars but I need this information many thanks for any assistance.

 

[kjeldio]

Hello I have just recently bought a 2013 fiat punto grande 1.4 petrol ( I think its 89bhp) and I'm wondering if anyone has a technical service manual in English please.
I have a Haynes but it doesn't have what I need.
I require the wiring schematic that has voltage and pinout cable colour for the o2 sensor/s or lambda sensors, I know very little about cars but I need this information many thanks for any assistance.

Hi Dave!
Try this.

http://4cardata.info/elearn/199/2

BRs. Kjeld

 

[Bernievarian]

8 or 16 valves ? Color codes are the same but the pin # at the ECU are different. If it's a Tjet, then colors are different as well ! I do have all 3 versions of the drawing.

BRs, Bernie

If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)

 

[sinbad123]

hello everyone

i have a punto 2012
trying to install an ebay alarm
would apprciate help to locate the wires and colors for connecting the central lock wires

thank you

 

[Bernievarian]

Hi (who?)

here's some stuff...

BRs, Bernie

If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)

 

[sinbad123]

thank you very much sir for diagram.
and name is manjit.

another question sir is that the car already has remote central locking,would installing the alarm and its central locking interfere with the

original central locking

thanks manjit

 

[Bernievarian]

Hi Manjit,

they should not interfere with each other, but if you want to be sure, install blocking diodes in EACH circuit so the signal of one device won't reach the other ...

BRs, Bernie

If someone here helped You fix -or better, understand- your issue, hit the thanks icon @ bottom right corner, it's free and makes us feel helpy ;-)

 

[sinbad123]

thank you sir, bernie