swirlyyyyyyyyyy

[dan_russ_27]

okay so do i apply swirl x first for the srp??

 

[Andy Monty]

okay so do i apply swirl x first for the srp??

yes swirl x on a moist foam pad worked in a small area 1 ft square for about a min or till it becomes totally clear (just an oily residue left) then buff off

then SRP then a wax/sealant

 

[tim1989]

is swirlx not more or less the same as srp do you need both?

 

[Andy Monty]

is swirlx not more or less the same as srp do you need both?

swirl x will remove the swirls where as SRP "fills" most in

bloody hard work though is swirl-x probably need 2 or 3 hits to see an improvement

 

[dan_russ_27]

yeh i knw im think alteast 3 hits then agen i cud just machine it but i just want to knw which is best to lay first i would have thought swirl x then srp??

 

[Andy Monty]

yeh i knw im think alteast 3 hits then agen i cud just machine it but i just want to knw which is best to lay first i would have thought swirl x then srp??

yes otherwise the swirl-x will remove the SRP's fillers

 

[dan_russ_27]

thankyou