This post contains affiliate links which may earn a commission at no additional cost to you.
Barchetta Subwoofer
- Thread starter KC3
- Start date
Currently reading:
Barchetta Subwoofer
OP
OP
Did someone here win themselves a subwoofer.
OP
OP
OK ! Recieved my subwoofer but unfortunately with no connections or cabling.
Any idea where i could purchase these?
Any idea where i could purchase these?
I received no cable when I got mine but I took the kit out of it and wired my own standard mid-range speakers in just to act as rear sound. I can hear the music a bit better, especially with the top down. Adding an actual subwoofer would really finish it off.
Now the cable - Would it still be available with Fiat? I was looking for some bolts for it and it came up as a part. This was in 2009 - so not that long ago. Maybe Henk at http://www.barchettaparts.com could find one?
Now the cable - Would it still be available with Fiat? I was looking for some bolts for it and it came up as a part. This was in 2009 - so not that long ago. Maybe Henk at http://www.barchettaparts.com could find one?
OP
OP
Cool! Thanks Nick,
Looks like I will be tinkering with the box now I,ve had a good look round it.
I will split the box, use just the rear section and make some other housing to meet the rear section.
I think by doing this I would also be able to fit the chrome roll bars back into the rear.
I,m planning a 10inch sub behind the passenger seat along with an amp and some new rear mids and tweeters into the new enclosure.
Hopefully it will all look as a standard part once i,m finished with it.
Looks like I will be tinkering with the box now I,ve had a good look round it.
I will split the box, use just the rear section and make some other housing to meet the rear section.
I think by doing this I would also be able to fit the chrome roll bars back into the rear.
I,m planning a 10inch sub behind the passenger seat along with an amp and some new rear mids and tweeters into the new enclosure.
Hopefully it will all look as a standard part once i,m finished with it.
Hi
You can order the sub cable from FIAT. Thats what I did. Also order the special bolts and rubbers that hold the sub in place.:slayer:
You can order the sub cable from FIAT. Thats what I did. Also order the special bolts and rubbers that hold the sub in place.:slayer:
OP
OP
Hey Doc,
Glad to have you pop in. but we want you back !!!
I,m sure you must have built up some collection of spares and new mods.
Looks like I will be modifying the sub woofer and using just the back half rear section. Somehow I will make another half from wood/fibreglass and mold that around my chrome hoops.
Also add a rear glass section for a windstop.
Should be a nice Mod once I can get into it.
Glad to have you pop in.
but we want you back !!! I,m sure you must have built up some collection of spares and new mods.
Looks like I will be modifying the sub woofer and using just the back half rear section. Somehow I will make another half from wood/fibreglass and mold that around my chrome hoops.
Also add a rear glass section for a windstop.
Should be a nice Mod once I can get into it.
- Joined
- Jul 30, 2009
- Messages
- 671
- Points
- 113
Mine did not have a cable too
I made subwoofer cable from the connector from the immobiliser ecu.
It's just the same. Then you'll need to rewire it, find scematics of it and solder it. But probabely easier if you buy it off fiat.
The bolts that are used to hold the subwoofer down are the same ones that hold the dashbord.
That if.. you have a barchetta in spares
I made subwoofer cable from the connector from the immobiliser ecu.
It's just the same. Then you'll need to rewire it, find scematics of it and solder it. But probabely easier if you buy it off fiat.
The bolts that are used to hold the subwoofer down are the same ones that hold the dashbord.
That if.. you have a barchetta in spares
Hi Yep still have a load of new bits all packed away in boxes for the day I get some free time. The last project I was working on was replacing all the wishbones and swing arms and detailing them red before fitting.
KC The car looks great!
Doc
:slayer:
OP
OP
Doc,
How much was it? and is the quality any good. would I be better to make my own.
