Removing Bravo Bumper

[Gary]

Hello all.
I have bought some mesh to trim the bottom of my front bumper and need to know how to take it off!
I tried to do it today (removed wheel arch screws, 4 bolts under bumper, 2 bolts centre top of bumper) and the main restriction was on the corner area back to under the front wings. Started to remove the headlights, but stopped as seemed I need to take out more then 2 bolts. Any help appriciated and my guess is nige will know!

P.S. 1998 Bravo SX TD100

 

[Si]

bumper

 

[Si]

bumper

Ok from what I remember from doing mine.

Theres 2 bolts at the top of the bumper between the 2 headlights when you lift the bonnet up.
Jack the car up remove the wheels and then the plastic vents for the brakes in the front wings. Theres 2 bolts in here on each side of the car. 1 about a foot in along the top of the bumper, the other's at the top and in the corner of the bumper.
If you have foglights you'll need to remove these.
Then theres about 8 screws/bolts along the underside of the bumper, remove these.
The bumper should now be loose, all that remains are to pop out the 2 ball joints, 1 under each headlight.

Refitting is the reverse of removal.

 

[Gary]

Cheers

Thanks Si, sounds about right, will do on the weekend.
Yours looks good,
Cheers
Gary.