No Spark Uno Turbo

[MrTurbo]

Good day,
Hope you guys can help me out.
Im at loss. I have an Uno Turbo 1400.
New engine. New T28 drift spec turbo. Intercooler, copper button clutch etc... Car was idling, switched it off and after a while wanted to start it but there is no spark. New coil installed, still nothing. There is power and earth to the coil. Timing is set up 100% but there is no spark on any of the leads from the coil. Tried 3 different coils and still nothing.. Any help or suggestions where to check next?

 

[tayto.king]

Maybe the T28 "drift spec" turbo doesn't want to work, as it's just realised it's been fitted to a front wheel drive car
Crankshaft pulley sensor incorrectly adjusted or not plugged in properly.

 

[fingers99]

Crankshaft pulley sensor incorrectly adjusted or not plugged in properly.

If it has one!

Otherwise, I'd look to the root of all evil -- the dizzy.

 

[tayto.king]

If it has one!

Otherwise, I'd look to the root of all evil -- the dizzy.

Try this link and scroll down a for a Uno ignition system diagram https://www.fiatforum.com/uno/298457-uno-turbo-ecu-pinout-diagram.html

Other than that I'd try the winding handle that comes with every Uno Turbo, insert it through the hole in the radiator and turn the handle to crank the engine. But remember, always have a man with a red flag walk in front of you at all times

 

[fingers99]

These old IE systems are strange. Dizzy and crank sensor, AFM and MAP sensor.

It's a miracle that any of them worked for more than 10 minutes!