G gordenbanks New member Joined Jan 27, 2007 Messages 4 Points 3 Location aylesbury May 27, 2007 #1 Just been told the bearing on nearside macpherson strut has failed any ideas of cost and how hard it is to change chers
Just been told the bearing on nearside macpherson strut has failed any ideas of cost and how hard it is to change chers
Jamie put a towel on it Parked in the garage Joined Feb 10, 2007 Messages 6,022 Points 902 Location Beds/Herts May 27, 2007 #2 which car?
OP OP G gordenbanks New member Joined Jan 27, 2007 Messages 4 Points 3 Location aylesbury May 27, 2007 #3 Re: chinq Sorry missed the most important bit its a chink on a K plate
toad101 just can't get enough Parked in the garage Written a guide Joined Apr 21, 2006 Messages 5,077 Points 887 Location south east wales May 27, 2007 #4 hi! welcome to the forum, there about £30-£40 there not hard to replace aslong as you have the right tools (spring compressor/clamps,couple of spanners and a decent socket set)
hi! welcome to the forum, there about £30-£40 there not hard to replace aslong as you have the right tools (spring compressor/clamps,couple of spanners and a decent socket set)