Technical induction pipe

[kimi1984]

wondering if one of u guys can help me? i need some pipe to go from the inlet manifold down to where the airbox was for mu induction kit. guy who had car b4 put filter right on inlet, great until engine gets hot then car dont like it!

HELP ME

 

[custard]

you mean the alu ducting?
you can get it from diy stores,motor factors and sometimes ebay though it tends to be quite big

 

[kimi1984]

dont think it can be metal as it runs right across the top of the battery and close to the ABS system.

 

[sumplug]

dont think it can be metal as it runs right across the top of the battery and close to the ABS system.

you mean the rubber housing that runs between airbox and massmeter.ask perhaps on the tipo site for one or fit a proper K&N 571 filter[no 0076].one on e-bay for £86 new.

 

[Hellcat]

Wrap it in duck tape... Just like mine!

 

[kimi1984]

think ill get a K+N around xmas time.

 

[Trancendental]

think ill get a K+N around xmas time.

Read the Tipo Air Filter Threads... you may want to reconsider.

 

[kimi1984]

tipo air filter thread?

 

[Trancendental]

K&N vs Standard Air Filter
https://www.fiatforum.com/showthread.php?t=45345

I thought there were more threads on this topic but after looking I didn't find much.

 

[sumplug]

just to varify.the 16v tipo induction in standard trim,is a bit restricted.it benefits from a K&N kit.all other single point tipos are not really.its not the filter thats restricted on these,its the injector housing/venturi.