C
chris
Guest
Thanks for the two replies to my post this morning.
Like I said, I only had 10 mins to look at it before I went to work. Thanks to Haynes, I looked under the wrong seat!
I pressed the reset tit on the inertia switch and it still wouldn't start.
I pressed it hard about 20 times and it still wouldn't start.
I took the frigging thing off and shook it. It went clank inside. Refitted it and it fired first time!
Like I said in my first post, this switch was replaced in January, so if yours needs resetting, don't assume it just needs the button pressing!
Cheers,
Chris.
Like I said, I only had 10 mins to look at it before I went to work. Thanks to Haynes, I looked under the wrong seat!
I pressed the reset tit on the inertia switch and it still wouldn't start.
I pressed it hard about 20 times and it still wouldn't start.
I took the frigging thing off and shook it. It went clank inside. Refitted it and it fired first time!
Like I said in my first post, this switch was replaced in January, so if yours needs resetting, don't assume it just needs the button pressing!
Cheers,
Chris.