General HELP! I Got Panda, Want Body Kit!

[dave69]

<font color="black"></font id="black">

Hey! I recently got a panda! And i decided i want a body kit....but....I do not know where to get 1, or how much it'll be!! PLS HELP! Cheers [8D]

 

[John H]

I've had a bit of a look around and can't find what I can half remember
ISTR there is a German site which does (or did) some parts..

In the mean time have a look here:

http://www.thomassoft.com/PandaPower/style.html

you might find other links here, if you survive all the pop-ups [!]

http://fiatpanda.tripod.com/links.html

Here's a pic to be going on with

They are not grazy...

 

[peterlloyd]

Have a look at

http://www.lester.it

I don't know where you are but my daughter's boyfriend works for C.A.R (mainly in the south - Guildford, Slough, Reading, Streatham plus others) and they can get Lester bits and pieces.

Stilo Active 1.2 5 Door/ Panda 4X4

 

[dave69]

<font face="Comic Sans MS"></font id="Comic Sans MS">

Thanks for the replys, the links have given me ideas , I'm now, erm, considering puttin a sub woofer in the boot....! any one know a gud place to buy one?

cheers [8D]

 

[rrockettman]

I've just checked out the Lester bodykits...Ugh! Don't they do MDF ones!
Start off with some decent alloys, 175x60x13 tyres, a rear spoiler from a Citroen AX and give your car a good polish. In time you can lower the suspension and mess about with the engine and brakes.
Happy Pandering.

Russ

 

[peterlloyd]

I think the problem is that the bodykits were designed when the car was new and they still have the moulds. Remember the Panda is angular in design and nothing will disguise that.

I doubt if anyone will invest in new moulds for a Panda.

Stilo Active 1.2 5 Door/ Panda 4X4

 

[Panda_Boy]

i want the rally body kit with wide arches and the lot. it would look so good. dont know where the hell you could get 1 from tho. im thinking of going 2 a body kit maker this weekend and seeing how much it would cost to get one made.(my aim is to have the fastest and best looking one in the world )

 

[Enzo]

Try a search for the italian "Cadamuro design"...they produce bodykits for a lot of cars...and they seem to be expensive, tooB)

 

[steveyensen]

If you can get bodykits (or anything else) to hide rusty wheel arches then I might be interested ...

Steve "2 Pandas" Yensen - the white-haired lunatic and beagle fanatic ...

Rugby is a game played by men with odd-shaped balls

 

[weta]

Panda Boy: I've been looking for the same kit without any luck. Have you got any pictures of the Fiat/Seat Panda Rally kit?

 

[sabeltandcavia]

There are no bodykits being made for the Panda, other than the Lester ones. But if you really want the Panda to look good, you won't need one anyways. The thing that would change the cars' appearance most, I think, is to lower it drastically. It just sits too high on its wheels! There are lowering springs that will lower the car about 30 to 35 mm front and back, but I think it would look awesome if you could lower the car 50 to 60 mm, and use 14 inch wheels with low-profile tires!

|| GONE IN 60 MINUTES ||

 

[Timbo Panda]

why not just buy a fiat uno turbo bodykit and modding it to fit