Front and rear bumper lacquer flaking.

[Andeh]

Whats the cheapest way of removing the flaking lacquer on the front and rear bumpers?

 

[Anonymous]

id say flak it off and lacquer over it and polish it like crazy to blend it in, if not take it to a body shop or somethign get a quote

 

[Buzz]

you need to sand it down with a medium/fine grit paper and get all the damaged laquer off. Then re-laquer it with a rattle-tin outta hellfords, and sooth the joins a bit. it should come out ok, but if you have the cash, a bodyshop can fix it fairly easily, and in only a couple of days.

Buzz
The champion of the Bravo 1.4 & now ex owner of a Bravo 1.8

 

[Ash]

if you wasnt so lazy, got off your ass one sunday in a month and gave your car a good polish and a wax you wouldnt be asking this now!

all the clear coat needs to be rubbed back with p600 wet and dry needs to be a good two coats of clear. hopefullt the base coat underneath the clear wont be damaged otherwise you will have to repaint the whole lot.