Technical fiat punto radio wiring

[bolyde]

Hi!My punto got robed and the radio taken!instead of just takin the radio tehy had to taje the plug and cut the whires!No i am in trouble cause i bought a new radio and it comes with its own plugs!now my problem is that i have all these whires and the owners manual of the fiat punto (from 1998) doesnt describe all the whires in there!these are the whires i have:

orange/green ->
orange/black ->
white/black ->
red/black ->
blue/red ->
blue/yelow ->
pink/black ->
black/violet ->

yelow/black ->
gray (or white) ->
black ->
red ->
red/black (thiner then the others) ->
black/violet (thinner then the others) ->


the conclusion i got from the manual is that the first whires i whrote are from the speakers and the other from power , etc!can any one plz identify all the cables, and in the speaker cables, tell me witch are + and wich are -!

1 have to plugs for all these cables 1 with 8 whires for the speakers, and another one with 4 whires that say:

Memory 12Vt
Power Antena
12V Plus
Ground

Who can help me plz!
tks and merry christmas...

 

[Hellcat]

Connect memory 12v and 12v plus together to the red cable.
Connect Ground to the thick black wire.

For the speakers just undo the screws and look on the back of each speaker and see what colour wire goes to it.

 

[thefishdude]

your car is a mk1 punto???
if it was mk2 i could porbbaly tell you by looking in haynes mnaual. the other thing you cfan do wich i done was is go to scrappy cut the iso connectors from a punto then go home and connect the matching wires up and voila you back to how it used to be. but you say your new stereo dont use iso conenctors and has its own ?

 

[bolyde]

Problem solved!tks every one...

 

[s512]

hi!
I have the same problem as Bolyde - mines a 98 punto mk1 & i'm trying to fit the stereo.
all the wires are the same, this is what ive worked out so far:

yelow/black -> to fuse box??
gray (or white) -> steering wheel controls (n/a)
black -> earth
red -> 12v??
red/black -> ??
black/violet -> steering wheel controls (n/a)

so can someone please check to make sure the wires are right, and fill in whats missing

hellcat, you said connect the continuous and switched power supply from stereo to the red wire, but will this mean the stereo stays on when ignition is turned off?

also, does it matter which way round the speakers are connected - +ve and -ve?

thanks, any help appreciated
s512