Technical fiat ducato motorhome

[rigger]

I have a fiat ducato motorhome 2008 i have just replaced front suspention arm bushes i would like to know what torqe settings the bolts should be at and the ball joint
also i faild my mot on the same motor for having to low a beam on my head lights can this be to me having to put air into my rear suspension as the garage that it had a don word ramp and i had to alter the hight and i just left it up i never told the garage thank you

 

[Kahcorp]

Hi
I do the three bolts at 35 ft lb & ball joint nut at 65lb. Check with the manufacturer of the ones you purchase.

Headlights on the X250 are easily adjusted up & down & side to side with an extended Allen Key tool. I think it is 6mm by memory.

 

[rigger]

Hi
I do the three bolts at 35 ft lb & ball joint nut at 65lb. Check with the manufacturer of the ones you purchase.

Headlights on the X250 are easily adjusted up & down & side to side with an extended Allen Key tool. I think it is 6mm by memory.

thank you very much great help from rigger

 

[rigger]

thank you very great help thank you again from rigger