Technical Fiat Coupe o/s stub axle

Currently reading:
Technical Fiat Coupe o/s stub axle

Bravo-Dan

New member
Joined
Jul 4, 2005
Messages
2
Points
1
Hey all

I fitted a new wishbone on the driver side thinking it would fix the clunking noise I was getting...there was and still is alot of movement on the bottom ball joint, if i tighten the bolt up anymore i'm sure it'll snap, im guessing the hole in the stub axle must of worn.

So I need an o/s stub axle for a fiat coupe 16v turbo, but as there arent that many of them about...what other fiats have the same axle? I'm thinking Bravo HGT and 2 ltr Mareas???

Thanks

Dan
 
sounds like you mean the hub carrier?

i 'think' there are 2 different size pin's on 16v wishbones and it sounds like you have the wrong one.

if the pinch bolt is done up tight and you still have play there isnt much else it can be.

Ry

EDIT: this is what makes me think the above:

https://www.fiatforum.com/classifieds/showproduct.php?product=14307
 
Last edited:
Oh right thanks,

So is it unlikely that the hole in the hub carrier for the pin is worn?

The pin on the old wishbone is worn, looks like its been moving for a while.

Thanks
 
Back
Top