Technical  Fiat 126 carb advice needed!

Currently reading:
Technical  Fiat 126 carb advice needed!

gozzomer500

New member
Joined
Dec 24, 2008
Messages
1
Points
1
Location
California
Hi,
I have a 65 Fiat 500 w/ a 126 650cc motor. The carb is an endless source of stress. I have rebuilt the carb, but the problem is the choke. It will idle after warming up on half choke, but will die out if choke is released. The car is able to be driven, but is not able to draw full motor potential and speed (pickup is slow and top speed is low). Please advise.

Gozzo500
 
Hi and also 'welcome to the forum'

It may be worth checking if the rubber 'o' ring that is on the mixture screw is okay and in one piece. Its the screw on the carb that faces you as you look in the engine bay nearest to the valve cover. If that rubber o ring is split or not there it can cause similar sounding problems to what you say. Give it a go - good luck !!
 
Back
Top