FAO STU R

Currently reading:
FAO STU R

A

Anonymous

Guest
hello mate how did u get on with those gauges??

ill be contacting Nick at auto guage later as i need a new printout of the vacuum setup.

want me to get u a price for the guages from him?

also r u wanting my spare apiller cover so u can fibreglass to it?

Smee
 
If you could get me prices that would be briliant, cheers.

http://cgi.ebay.co.uk/Auto-Gauge-52mm-2-Smoke-Face-Volt-Gauge-2791W_W0QQitemZ8011149777QQcategoryZ72215QQrdZ1QQcmdZViewItem

It was this sort I was looking for. I won't be buying them till end of the month though.

Decided to my xmas shopping this month. Going to MeadowHell (Meadowhall shopping centre), which is not going to be pretty.

How much do you want for the A-Pillar mate??

Is it easy enough to fibreglass in? Never fibreglassed before?

Stu R
 
This post contains affiliate links which may earn a commission at no additional cost to you.
u cna have the it. i dont need it no more :)

ill get u a price u after the black out one like that?

which guages u want? just that one?

fibreglassing isnt to hard. just time consuming. if i was u. i would go get a detail sander.fibreglass. p38 and p40.

get the pod. and cut it (if need be) to fit on to the apiller cover. i then taped it in place and put 2 small bits of fibre glass at each end. once it had set (over night) i then added 2 long strips down the side of the pods to makes ure it had a good grip to the cover.

built up the ends at the same time with more fibreglass.

i then added p40 to round. the ends off and make the general shape. used teh orbital sander with 80 grit paper. and sanded it right back.then a light skin of p38 and use 400 grit sand paper. then a light skim OVER EVERYTHING the entire length of the piller and sand this with 800 grit.

then get it sprayed or do it urself

Smee

smeetag2.jpg

http://www.visionstyling.co.uk for ALL your car needs!!!
 
Cheer smee

Yeah, its the black out one that I am after.

Defo want the volt meter, I want a second one.

This will be either a oil pressure gauge or an amp meter.

What do you want todo about the pillar. Do you want to post it??
 
Forgot to ask you.

How many gauges does the pod hold?

Cheers
 
its usually 1 per pod chap ;)

smee has 2 pods.

Dan

dantagnew.jpg

Skate2create & "Bluebeastie" Angeltuned 1.2 16v - 9.8 0-60 @trax '05;)
Angeltuned, Iridium spark plugs, enclosed airfilter & heavy right foot = :);)
 
I see. In that case, Smee where did you get your pod from mate and how much? :)
 
No but are you coming from North or South?

If your coming up from south then you will drive straight past my house almost.
 
In between Chesterfield and Sheffield. Juction 30 is about 2mins from my house.

I know there were some metting at services before M18 turn off. That is one up from where I live.
 
What route will you be taking to get to the mudcart?

Will you hit either M1, M18 or A1 at anypoint of your journey.

I assume your going up in a convoy, if so then if I know the route your taking, I will find the nearest location without taking you off your course.
 

Similar threads

S
Replies
5
Views
773
sly si
S
A
Replies
2
Views
742
M
A
Replies
1
Views
315
M
S
Replies
2
Views
447
sly si
S
K
Replies
1
Views
587
M
Back
Top