olliesgrandad
New member
- Joined
- Jun 19, 2012
- Messages
- 20
- Points
- 4
Had my 2012 Punto GBT multijet into the dealer today as the dashboard cantre right air outlet wheel had jammed the vent open . Apparently when stripped there was an excess piece of plastic fouling the mechanism.
My car has the 68R tom tom option so this may not affect other models with a different moulding.
They also fitted a new clutch footrest/air vent on the transmission tunnel as the previous one had warped and the sharp end kept trapping my trouser leg when changing gear. A new one has fixed the problem, but I was asked if they wanted me to put a screw in to hold it in place as it is a common problem. Have left it for the time being as car will be due a service in March and if it is a problem it can be done then.
My car has the 68R tom tom option so this may not affect other models with a different moulding.
They also fitted a new clutch footrest/air vent on the transmission tunnel as the previous one had warped and the sharp end kept trapping my trouser leg when changing gear. A new one has fixed the problem, but I was asked if they wanted me to put a screw in to hold it in place as it is a common problem. Have left it for the time being as car will be due a service in March and if it is a problem it can be done then.