J jcc New member Joined Dec 22, 2008 Messages 38 Points 8 Location Skipton Apr 26, 2010 #1 My 2004 Multi has alloy door mirror posts, which are now starting to corrode quite badly. What is the best fix for this? I was going to rub them down and use black hammerite, but not sure if that would be best for alloy??
My 2004 Multi has alloy door mirror posts, which are now starting to corrode quite badly. What is the best fix for this? I was going to rub them down and use black hammerite, but not sure if that would be best for alloy??
Zundapp Member Joined Sep 16, 2007 Messages 369 Points 56 Location West Coast of Scotland Apr 26, 2010 #2 Hammerite and Smoothrite aren't very good on alloy, they don't adhere very well and soon start to flake off. Ideally rub down to bare metal and use an etching primer which will then allow you to use most types of paint for a top coat.
Hammerite and Smoothrite aren't very good on alloy, they don't adhere very well and soon start to flake off. Ideally rub down to bare metal and use an etching primer which will then allow you to use most types of paint for a top coat.