Technical Clutch failure

[alexwr92]

Well today I started the car put clutch down had a horrible squeaking put it in gear car stalled managed to get it out of gear but now it's leaking from the bottom of the engine were the gear box connects and the clutch pedal goes down but have to lift it back up with my foot I know it needs a new clutch n fly wheels n release bearing I have one but is there any thing else I will need

1.9 multijet 130hp sporting

Thanks Alex

 

[dtimmins1985]

Your release bearing has probably eaten into your clutch fins / blades / splines whatever they are called.. i have had two motors do it..

Some may say its clutch cylinder but you say there is a loud squeal so its defo metal on metal thats not meant to be.. same synptoms as mine where before. Drive it using revs to change gear if your lucky but sounds like its past that as its leaking...

Where abouts u based?

 

[dtimmins1985]

Also.. if the gearbox housing aint broke, you should be ok with parts you listed.

 

[Bernievarian]

Could it be that your hydraulic hose has gone lose or broken ??

BRs, Bernie

 

[alexwr92]

Your release bearing has probably eaten into your clutch fins / blades / splines whatever they are called.. i have had two motors do it..

Some may say its clutch cylinder but you say there is a loud squeal so its defo metal on metal thats not meant to be.. same synptoms as mine where before. Drive it using revs to change gear if your lucky but sounds like its past that as its leaking...

Where abouts u based?

Am Mansfield way n ye it's totally dead outside the house [emoji17] nice puddle of fluid under the car n I dont think the gearbox has gone as can still select gears but just don't have a clutch

 

[Bernievarian]

How 'bout your flexi ?

 

[alexwr92]

How 'bout your flexi ?

Flexi?

 

[Boroboy1655]

Your release bearing has probably eaten into your clutch fins / blades / splines whatever they are called.. i have had two motors do it..

Some may say its clutch cylinder but you say there is a loud squeal so its defo metal on metal thats not meant to be.. same synptoms as mine where before. Drive it using revs to change gear if your lucky but sounds like its past that as its leaking...

Where abouts u based?

Thats exactly what mine did, the cylinder failed and the clutch destroyed its self, ended up fitting a new flywheel as well as it was all off and was only another £100 to do.

 

[alexwr92]

Thats exactly what mine did, the cylinder failed and the clutch destroyed its self, ended up fitting a new flywheel as well as it was all off and was only another £100 to do.

Think mine maybe like that as well not sure yet just glad I bought a the flywheel n clutch kit

 

[multipete]

Check your brake fluid,as this fluid feeds the clutch as well.

 

[Bernievarian]

Flexi?

The one that comes from the master clutch cylinder and goes to the slave clutch cylinder; it's held by a little clip @ slave side that's prone to self get-off
=> no clutch disengagement => noise when trying to shift gear => oil spil on the floor ...
Check easy things first !!

BRs Bernie