Technical Changing connector of ignition coil

[Seracing]

Hello everyone,

I've got a new connector of ignition coil because one of them is broken. It's from a Stilo with engine 1.4 - 95 hp with reference 843A1000.


The doubt is the new connector has the wires with colours Red + yellow + black, meanwhile the wires of the origina connectors are:

Coil 1 => White + white + green
Coil 2 => White + blue + green
Coil 3 => White + brown + green
Coill 4 => White + yellow (or white aged...) + green


The connector is for the coil 3.

Link to images =>
https://ibb.co/VjDLgpw
https://ibb.co/njgS9QM
https://ibb.co/ZBHqzgj
https://ibb.co/5hTHJZH
https://ibb.co/c2JhD2r

Regards,

 

[Abarth L]

Hi
Just make sure plugs (old & new) is facing up.
You should then be able to put left on left, centre on centre and right on right, does not matter what colour the cables are.
You can confirm by measuring ohms on each pin (** after it has been cut off **)