Airbox/Airscoop mods?

[Alan]

As above, are there any?

 

[Lee]

Drill holes in it if you want it to sound different.

 

[Alan]

Apart from all the hot air being sucked in from the engine bay lol

I mean like enlarging the air feeds, removing any restrictions etc

 

[Matt]

not if you put them underneath above the the wheel arch.

 

[Allan Wall]

re

no offence but sounds liek you know what mods you want to do already?

cold air feed? remove restrictions?

maybe make a heat shield from rest of engine bay then drill holes - from memory they woudl have to be underneath otherwise you'd be allowing air into the intake that hasnt passed through any filter at all

 

[Anonymous]

I have removed restrictions from previous cars but just wondered if anyone had any tips on doing it with a bravo, cant seen to see any restrictions apart from the box being a gay shape lol

 

[Buzz]

thats not a restriction as such. its slightly baffled inside, which IS a restriction, albeit a very minor one. if you were keen you could chip them all out with a shiny new chisel, about 8mm wide would be plenty. also, a cold air feed is almost ALWAYS a good idea, but remember that when taking it from the wheel arch, you'll catch a LOT of spray in the wet, meaning all sorts of crap hitting your filter. your front bumper has nice big gaps that are better suited, and the longer distance means any water and dust/dirt/grit will hit the insides of the feed before getting to the filter, thereby prolonging the life and efficiency of the filter, but possibly requiring you to hose out the longer feed pipe every few months.

Buzz
The champion of the Bravo 1.4 & now ex owner of a Bravo 1.8