Technical 2.3 multijet ECU faulty

[Relayman]

Ducato 2011 2.3 multijet.
Upon inspection of my odometer not having the correct mileage I bought multiescan to amend, I can add the mileage and it saves but does not physically change the cluster, as perusing the software I noticed the ECU has faulty marked alongside it. Is there any way of finding out why and where to rectify this or is it a replacement ecu and what are the implications?
Cheers

 

[rolopolo]

There are ecu doctors that you can send it off to be tested and rectified if an issue.

Check the main wiring harness that connects to the ecu. On my 3.0 but assuming the same on the 2.3. One of the two harness's is cable ties to a steel tube frame, this harness rubs against and wears through causing shorts and corrosion in the wires, mine I think I saved before damage done. By removing the cable tie

 

[Relayman]

cool, thanks I will try that and see

 

[corcai]

Probably needs proxi alignment if you've changed the clocks.