Hey was just wondering if anyone knows how to make it possible to bleed the clutch through the bleed nipple as there is usually a nut or bolt or something but i am unsure of how to do this on the stilo jtd as there dosent seem to be one?? https://www.fiatforum.com/attachment.php?attachmentid=32739&d=1189881189

IIRC there is a clip that keeps the flexi pipe locked in position, pull the clip away but don't take it off - then pull the hose away from the slave cylinder, but again don't take it fully out - you will now be able to pump fluid through the bleed valve.

I always found it best to open the valve on the down stroke of the pedal, and close it on the up stroke of the pedal, so pull the hose out slightly on the down stroke, and put the hose fully in on the up stroke.

pull up the silver metal clip,near the nipple,but dont pull right out/off,if poss.remove rubber cover. then pull the rubber flexy pipe out slightly,fluid will now come out of the bleed nipple,leave to drip out,clutch pedal lifted up,when only fluid comes out ,push in pipe,push silver clip back down,job done.............mp