help sei boot size

DaDudee · May 7, 2006

Wondering whether this would fit in a sei. http://caraudiosecurity.com/shop/product/products_id/4108.html

two 12" boxes. also let me know what ya think of the kickers n whether i could get more spl for the £.

paulbfd · May 7, 2006

SPL and Seicento don't really go (unless you do what "Warrior" has done - have a look).

You need a large ported enclosure to go loud. Not really enough room for a 12" ported in the Sei, so maybe a 10", large box, tuned low with 1k up it's chuff - should be loud.

chaos · May 7, 2006

Yeah, you need ported for SPL, and 12" would be pushing it - 10" would be more more achievable..................something like this http://www.caraudiodirect.co.uk/product_info.php?products_id=2964 would be good powered by a suitable 1kW @ 1 or 4ohm amp, such as
http://www.caraudiodirect.co.uk/product_info.php?products_id=4322

You'll need plenty of sound deadening, a good front end setup, and you'd definately need to look at the car's charging system.

DaDudee · May 7, 2006

that sucks

not fit a double 12" in a sei? or two 12" boxes? i don't think i want a 10" sub. would the 12" RE sub fit?

chaos · May 7, 2006

DaDudee said:
that sucks not fit a double 12" in a sei? or two 12" boxes? i don't think i want a 10" sub. would the 12" RE sub fit?

Those enclosures you linked to are sealed - you want ported enclosures if you're going for SPL. The volume required for a ported enclosure is much larger than that needed for a sealed enclosure for a given sub. I doubt a 12" ported enclosure would fit in a Cento boot...............and if you're going ported, you're gonna have to build your own enclsoure.

paulbfd · May 7, 2006

I like how that kit comes with a 4 gauge wiring kit. That'll work well with 1500wrms!!!

chaos · May 7, 2006

paulbfd said:
I like how that kit comes with a 4 gauge wiring kit. That'll work well with 1500wrms!!!

I missed that.................

seicentojay · May 7, 2006

heres a pic of my install 2 12" vibe b-subs and they sound loud th box is split in the middle and both are ported at the rear

DaDudee · May 7, 2006

so can anyone tell me the max height,width, top depth, bottom depth mm for the sei plz

chaos · May 7, 2006

seicentojay said:
heres a pic of my install 2 12" vibe b-subs and they sound loud th box is split in the middle and both are ported at the rear

What volume are they? What frequency are they tuned to?

chaos · May 7, 2006

DaDudee said:
so can anyone tell me the max height,width, top depth, bottom depth mm for the sei plz

Dunno off the top of my head...............

seicentojay · May 7, 2006

the amps are turned a quarter way up and the subs boxes go right to the back seat and angled down dont know the exact volume but the subs are 900 watt each and are both ported and i used autoleads wiring which was £65

paulbfd · May 7, 2006

Dadudee,

If you want a killer system in your Sei, I'm selling a boat load of Diamond Audio gear and I'll chuck in a fibreglass wheel well enclosure.

I've got 2 amps, a D7401 (800wrms @ 12v mono) and a D7152 (150wrms @ 12V x 2), plus 2 Macdaddy 10.4 subwoofers.

This is serious car audio, each amp retailed at over £1000 and the subs at £450. I'm after down sizing to something a little more sensible.

chaos · May 7, 2006

seicentojay said:
the amps are turned a quarter way up and the subs boxes go right to the back seat and angled down dont know the exact volume but the subs are 900 watt each and are both ported and i used autoleads wiring which was £65

So how much power are the subs taking? I find it hard that you have a ported enclosure but don't know anytyhing about said enclosure.....................

chaos · May 7, 2006

paulbfd said:
Dadudee,

If you want a killer system in your Sei, I'm selling a boat load of Diamond Audio gear and I'll chuck in a fibreglass wheel well enclosure.

I've got 2 amps, a D7401 (800wrms @ 12v mono) and a D7152 (150wrms @ 12V x 2), plus 2 Macdaddy 10.4 subwoofers.

This is serious car audio, each amp retailed at over £1000 and the subs at £450. I'm after down sizing to something a little more sensible.

That is an extremely able setup there. Plenty of volume and excellent SQ

AppleSei · May 7, 2006

DaDudee said:
so can anyone tell me the max height,width, top depth, bottom depth mm for the sei plz

do you own or have access to a tape measure? surely you can measure it yourself.

Maybe there is something in your manual

DaDudee · May 7, 2006

surely i can fit two of those 12" kickers in the sei

custard · May 7, 2006

DaDudee said:
surely i can fit two of those 12" kickers in the sei

have you read any of the replies?
i dont know a lot of ice but if you read the replies its down to the volume required by the sub not its physical space the subs actually physically fill.
quality ice isnt about ramming in as big speakers as you can.

i would take the advice given from the ice guys,if not you can buy your choice of set up as its your car/cash

chaos · May 7, 2006

DaDudee said:
surely i can fit two of those 12" kickers in the sei

D'you think Paul and I would say no if 2 ported enclosures, tuned to a given frequency, would fit? 2 sealed enclosures would fit, but that's not an option if you're going for SPL. Also the wiring kit that comes with that bundle is totally inappropiate IMO (and I reckon Paul would say the same) - its of too small a gauge...................

AppleSei · May 8, 2006

DaDudee said:
surely i can fit two of those 12" kickers in the sei

try it by all means....just make sure you keep the receipt

help sei boot size

Currently reading: help sei boot size

New member

Ah. Not good...

New member

Ah. Not good...

Ah. Not good...

Member

Attachments

New member

Ah. Not good...

Ah. Not good...

Member

Ah. Not good...

Ah. Not good...

RIP L181 VBB

New member

Status: DEFCON Grumpy

Ah. Not good...

RIP L181 VBB

Similar threads

Currently reading:
help sei boot size