Refitting



Put the new part in place. First, gently persuade the rubber pipes onto the oil cooler. DON'T FORGET THE CLIPS!!. I used some pipe grips as my 'persuasion tool' (red arrow) but the last thing you need to to break the potentially fragile oil cooler inlet and outlet pipes so be careful.....

attachment.php


Refit the fiat clips on the oil cooler (also on the Stilo guide). Now refit the top right flex pipe. I gave up with the fiat clip on this one and used a jubilee clip instead:

attachment.php


Finally do up the top left bolt (the one which I have spent so much time with on this project....) and it's time to refill/bleed the coolant.
Previous page: Refitting