Guides by red

red
Updated
1.00 star(s) Difficulty rating
Views
48,304
A few folk seem to be interested in arming themselves with a cheap ECU code reader for Mk2 Punto so here’s the “tenner and a laptop” solution. First,the software. Go to www.fiatecuscan.net and check whether your model is covered. If so, download and install the free version of the software on...
red
Updated
Views
10,860
FIAT PUNTO 1242cc to Oct '99 (Mk I) CLUTCH RENEWAL Transmission removal 1. Work on a level surface. Apply handbrake and place chocks behind rear wheels. Slacken front LH (nearside) wheel bolts half a turn (it’s easier while weight is on the wheels). Jack up front of car (jack under...
red
Updated
1.00 star(s) Difficulty rating
Views
26,111
This was for a Mk2b 8v but it looks very similar to a Mk1 and Mk2 8v setup. Mk2b, 2003, typical symptom - loss of drive, clutch slipping. Ended up towing it home. I hadn't done a clutch on one of these before but always game for a new challenge. Borrowed Haynes from library and studied. I...
Back
Top