1/ standing at the front of the engine bay look down the back of the engine block in line with the oil filler cap and locate a small rubber boot with a single wire coming from it one end and at the other end a 22mm bolt.
2/ Carefully peel back the rubber boot cover to reveal the wire connected...
This job is not as hard as you may first think so dont be afraid to have a go!
I reckon it will take even a novice at the most 1/2 hr to achieve:thumb: !
1./ First of all go into the engine bay disconect the battery and locate the ECU and loom coming from it.
2./Carefully remove the plastic...