endrop - for all your online needs

Guides by flisko

Croma fiat croma 1.9 88kw alternator removal "from the top"
flisko
1.00 star(s) Difficulty rating
Views
8,439
*************************WARNING******************* disconnect both battery terminals before doing anything
Grande Punto grande punto dash bolts locations removal
flisko
3.00 star(s) Difficulty rating
Views
7,995
First disconnect battery
Grande Punto grande punto 1.4 16v 95hp engine 360 view
flisko
1.00 star(s) Difficulty rating
Views
3,150
Bravo fiat bravo 1.4 16v t jet engine xray
flisko
1.00 star(s) Difficulty rating
Views
5,023
http://www.italiaspeed.com/new_models/2007/fiat/bravo/technology.html
Croma fiat croma 2005- door panel removal, outer handle removal inner handle guide
flisko
1.00 star(s) Difficulty rating
Views
11,194
Time required: 120 mins Mandatory tools Allen key Torx key Screwdriver Drill
Punto (Mk2/2b) punto mk2 steering column sensor change
flisko
1.00 star(s) Difficulty rating
Views
3,405
punto mk2 steering column sensor change copied from here
Punto (Mk1) Sump Replacement
flisko
Updated
2.00 star(s) Difficulty rating
Views
7,244
My old sump which lasted 21 years (good job fiat) And a small hole which leaked oil slowly.
Punto (Mk2/2b) hgt thermostat change
flisko
Updated
1.00 star(s) Difficulty rating
Views
6,230
Time required : 36 mins Parts Needed Mandatory: New thermostat Gasket sealant Flat screwdriver Spanner size 13 Optional: New antifreeze 3 litres Distiled water 3 litres Circlips As per autodata hgt uses a total of 6 litres coolant mixed with distilled water ratio 50% / 50%
Punto (Mk2/2b) Input shaft bearing renewal
flisko
4.00 star(s) Difficulty rating
Views
2,516
Not my guide, just found it and its not in the guides https://www.fiatforum.com/punto-ii/158346-input-shaft-bearing-renewal.html
Back
Top