Guides by DiamondDave

DiamondDave
3.00 star(s) Difficulty rating
Views
5,064
This guide is an explanation of how I went about changing the cam sensor on my Multipla JTD. With this method, the timing should be held correctly (although I give no guarantees!!!!) Check out my other guide on how to test the sensor first before attempting changing. In the end mine didn’t need...
DiamondDave
1.00 star(s) Difficulty rating
Views
2,337
Before you go about changing your cam sensor, here is a guide to testing the sensor. Only figured this out after I had changed mine. The sensor is behind the cam pulley. Follow the wire from the front of the cam cover, over the top, along to the back and you will find the connector in a plastic...
Back
Top