hello all
My rad is blocked and leading to swift overheating problems. Checking the temperature of the rad surface as the fan cuts in, it is quite hot towards the top and cold at the bottom so i diagnose that it is blocked with sediment, unless anyone knows otherwise.
Therefore, please can i have your thoughts on the following from different suppliers:
"recore with brass and copper as is now" fairly local
"recore with brass and copper, two row X tubes, there's no space for anything deeper"
"send to us and we'll see what we can do (!)"
"Chinese new TIG welded aluminium rad with airbleed, 2 row 40mm core"
all at not inconsiderable prices that work out roughly the same.
Of course, I cannot find any OEM NOS stock
Recommendations and comments on the above, or other suggestions (apart from "Scrap it") please.
Thanks for your help.
RDS
My rad is blocked and leading to swift overheating problems. Checking the temperature of the rad surface as the fan cuts in, it is quite hot towards the top and cold at the bottom so i diagnose that it is blocked with sediment, unless anyone knows otherwise.
Therefore, please can i have your thoughts on the following from different suppliers:
"recore with brass and copper as is now" fairly local
"recore with brass and copper, two row X tubes, there's no space for anything deeper"
"send to us and we'll see what we can do (!)"
"Chinese new TIG welded aluminium rad with airbleed, 2 row 40mm core"
all at not inconsiderable prices that work out roughly the same.
Of course, I cannot find any OEM NOS stock
Recommendations and comments on the above, or other suggestions (apart from "Scrap it") please.
Thanks for your help.
RDS