Damotron500
New member
- Joined
- Sep 8, 2016
- Messages
- 4
- Points
- 1
Hi Everyone
First time posting here, hopefully I've got it right. I have a 2007 Punto Grande Active 1.2. Recently bought. The heater/blower does not switch on.
I have tried the following.
a) Tested the cable that plugs into the blower with a voltmeter, and it showed power when i switched it on/off from the dash.
b) replaced the resistor under the glove box, didn't work.
c) replaced the whole blower unit (new), still doesn't work.
I have not checked any fuses. Nothing i can find online/in manual tells me which fuse box/fuse position the blower unit is connected to. However if there is voltage in the cable, then surely the fuse is not at fault? If anyone knows where and which position its supposed to be that would be great.
I'm out of ideas.. any help would be hugely appreciated.
Thanks
Damian
First time posting here, hopefully I've got it right. I have a 2007 Punto Grande Active 1.2. Recently bought. The heater/blower does not switch on.
I have tried the following.
a) Tested the cable that plugs into the blower with a voltmeter, and it showed power when i switched it on/off from the dash.
b) replaced the resistor under the glove box, didn't work.
c) replaced the whole blower unit (new), still doesn't work.
I have not checked any fuses. Nothing i can find online/in manual tells me which fuse box/fuse position the blower unit is connected to. However if there is voltage in the cable, then surely the fuse is not at fault? If anyone knows where and which position its supposed to be that would be great.
I'm out of ideas.. any help would be hugely appreciated.
Thanks
Damian
Last edited: