Hi.
Well i've just put a deposit on a 1242cc Panda 2014. It felt OK-ish on the test drive but remember I'm coming from a 2.5v6 Rover. So this clutch sensor what is it for..... Stop start perhaps which mine doesn't have. Can this sensor be adjusted or even removed without effecting the ECU?
The clutch sensor can be removed with no ill-effects other than rendering the stop/start ineffective. It also stops the revs rising slightly when you are about to raise the clutch in gear from a standing start.
No warning lights appeared when i unplugged it from our 2013 500 1.2